Kenwood KR-A5050 AM FM Stereo Receiver

<p>Kenwood KR-A5050 stereo risiver</p> <p> e: 1993 - 1994 Years of manufactur</p> <p></p> <ul><li>Power consumption: 180 W</li> <li>Dimensions (WxHxD): 440 x 133 x 350 mm</li> <li>Tezina oko: 10.2 kg</li> <li>Original price approx. : 599 DM</li> </ul><ul><li>Number of inputs: <ul><li>1x Phono MM (Cinch)</li> </ul></li> </ul><p>1x CD/AUX In (Cinch) 2x Tape In (Cinch) 2x Video In (Cinch)</p> <ul><li> <ul><li>FM antenna</li> <li>AM antenna</li> </ul></li> <li>Number of outputs: <ul><li>2x Tape Out (Cinch)</li> <li>Headphones (6,3mm jack)</li> <li>2 pairs of loudspeakers</li> </ul></li> </ul><p><strong>Technical Data</strong></p> <p><em>Amplifier</em></p> <ul><li>Continuous power (at distortion) <ul><li>8 Ohm: 2x 105 W (IHF'66)</li> <li>4 Ohm:</li> </ul></li> <li>Dynamic power <ul><li>8 Ohm:</li> <li>4 Ohm:</li> </ul></li> <li>Total harmonic distortion: 0.03% (1 kHz with 50 W at 8 ohms).</li> <li>Attenuation factor:</li> <li>Frequency response (IHF'66): 20 to 20,000 Hz.</li> <li>Signal-to-noise ratio (IHF'66): <ul><li>Phono MM: 73 dB</li> </ul></li> </ul><p>Line: 100 dB</p> <ul><li>Stereo channel separation:</li> <li>Tone control: <ul><li>Bass: yes (±10 dB at 100 Hz)</li> </ul></li> </ul><p>Treble: yes (±10 dB at 10 kHz)</p> <ul><li>Loudness: yes (at -30dB volume approx. +8 dB at 100 Hz)</li> <li>High Filter:</li> <li>Low Filter (Subsonic):</li> <li>Mute: yes</li> <li>Direct/Line-Straight:</li> </ul><p><em>Tuner</em></p> <ul><li>Reception: FM, AM</li> <li>Frequencies: <ul><li>FM: 87.5 - 108 MHz</li> <li>AM (at 9kHz steps): 531 - 1602 kHz</li> <li>AM (at 10kHz steps): 530 - 1610 kHz</li> </ul></li> <li>Frequency response: 30 - 15,000 Hz</li> <li>Input sensitivity: <ul><li>FM: 1.3 µ F</li> </ul></li> </ul><p>AM: 40 µ F Distortion factor: FM: 0.4% (mono), 0.5% (stereo) (each at 65 dBf input signal) Distortion factor: AM: 0.5% (mono), 0.4% (stereo)</p> <ul><li>Signal-to-noise ratio: <ul><li>FM: 78 dB (mono), 73 dB (stereo) (each at 65 dBf input signal).</li> <li>AM: 50 db (30% mod. 1 mV input signal).</li> </ul></li> <li>Channel separation:</li> <li>Selectivity:</li> <li>Co-wave selection:</li> <li>Spurious wave selection:</li> <li>IF attenuation:</li> <li>IF attenuation:</li> <li>Output level:</li> <li>RDS: yes</li> <li>Station memory: yes/2</li> <li>RDS</li> </ul>